SLAB VS.CRAWL SPACE WHAT TO KNOW ABOUT EACH

 

Slab Foundation vs Crawl Space

Here in east Texas, we’re blessed with mild winters. Due to this, it’s rare for homes to be built with full basements. However, the old debate of “slab vs. crawl space” is alive and well. This article will look at the pros and cons of both types of foundations.

Slabs: the Good and the Bad

A slab is created by digging into the soil several inches, pouring in concrete, and reinforcing it with metal rods. The house is built directly on top.

This is a simple method of construction that allows house building to continue, without waiting days for footings or other foundation components to cure. Heating and air ducts are usually run through the attic, and the water heater and furnace are located in the home. Electric, sewage, and water lines run under the slab and enter the home at certain points.

Perhaps the biggest advantage of using a slab is cost. As much as $10,000 can be saved when building a slab vs. crawl space. This is especially true in areas with rocky soil, as excavating into stone can be very expensive. Also, slabs are lower to the ground than homes with crawl spaces, minimizing the number of steps needed to enter the dwelling. This can be a real plus for people with back, knee, or heart problems.

Slabs are not without their drawbacks, however. Since the house is lower to the ground, it is easier for insects and other critters to find their way in. Also, because the slab forms the floor of the ground level, it can feel uncomfortably hard and cold to people walking on it.

Since air conditioning ductwork is routed through the attic, it must be heavily insulated, which adds cost to construction. The need to install the furnace and water heater in the house takes up room that could otherwise be used for different purposes. If the electrical or water lines under the slab develop problems, then the foundation will have to be hammered through to effect repairs – an expensive proposition. Also, if the slab begins to crack, it can cause severe structural issues throughout the house. Many factors can cause cracking, including tree roots and soil movement. Finally, some people find the low-to-the-ground look of slab homes unappealing.

Pros and Cons of Crawl Spaces

Think of a crawl space as a mini-basement. Its height can vary from 16 inches to four feet. The ground that it rests on can be prepared in many ways: by pouring several inches of gravel on top of a vapor barrier, by building a block foundation, or by pouring concrete. The walls of the space itself can be made from precast concrete or cement blocks.

Many people prefer the look of a home built on a crawl space. Due to the fact that it is higher off the ground, vermin will have a harder time getting in. The space above the ground allows water pipes and electrical lines to be run under the home. This makes accessing them for repair work much easier. Finally, a crawl space can be perfect for storage.

Drawbacks of a crawl space include additional construction cost, though this is usually offset by higher resale values. A crawl space must be properly insulated and ventilated; otherwise, moisture can pool in it and find its way into the home. Pests like rats and insects can invade the crawl space, making venturing into it an adventure in terror for homeowners.

We Can Help Either Way

Whether you choose to go with a slab or crawl space, Ultimate Construction can do the necessary foundation excavation. We’re experienced, reliable, and we know our professions. Contact us if we can help with new home construction or any other projects. Our Maine Services are Demolition hauling, Pool demolition, landscaping grading, design & Lawn Mowing Drive repair, excavation service, and Water Drainage Solution.

Driveway Drainage system and solution

Driveway Drainage system and solution 

Driveways are the stretched pavements that bridge the gap between the road and your home. Though it may sound single to construct driveways, the reality is far different from this myth. Many things need to be taken care of while planning the construction of driveways or you’ll end up inviting unwanted trouble for yourself. Construction of driveways that don’t allow water to pass through it can cause damage to the driveways and your property simultaneously. So here are a few ways which will help you solve the driveway drainage issues: 

By constructing driveway drains  

Many times it is not feasible to handle the driveway drainage issues by constructing slopes, especially at places where the floor level is below the road level. In such cases, you can call in for professional contractors to install driveway drains. Constructing a trench driveway drainage system can stand as helpful in such cases, and these are long ones that have the capability of running down the entire length and breadth of the driveway. Also, ensure that you make use of grates to cover the trench drains so that any clogs can be avoided. Dirt and debris can easily clog the pipes; thus, you must cover it to avoid such issues. 

Construction of porous driveways 

Many a time, you can find water issues in driveways to creep up owing to the pavements that are non-porous and thus prevents water from seeping into the groundwater table. This kind of drainage problem can be set upright by constructing driveways that are permeable and porous enough to let the water pass through it to reach the ground. Making use of materials that allows this water passage can help in preventing any such water drainage issues in driveways. 

Proper driveway placement   

It is said that prevention is always better than cure. Thus placing driveways at places where there is adequate water drainage can be your best bet. Construction of driveways at places where there is sufficient drainage system allows the water to slope down without causing any harm to your possessions and property. 

Drainage pipes  

Drainage pipes are another water drainage solution that one can implement for long driveways. Installation of drainage pipes passing through the sides of the driveways can help in sorting out this issue. It will take control over the excess moisture present in the driveways and carry it out to drain it to another place. But before you channelize it to be drained to another site, make sure to check out the area where the water will be drained. It is better to have a look at the surroundings so that you can direct the water to a site that can handle excess water such as ponds, marshy areas, etc. 

Swales 

Swales are depressions in the ground that can cater to the excess water. These swales serve to be exceptionally good for driveways as it allows the water to stop inside it from the landscape. One just needs to take care that these swales are built at a lower level in comparison to the landscape from where the water will be drained.  

Bottom line 

So these were a few effective drainages solution hacks that you can try out to resolve water issues in the driveways. So if you are someone facing the same issues, then it is high time for you to call for the Construction contractors (San Antonio). They can help you deal with such a situation by implementing proper drainage systems to stop any water blockage and clogs.

Here, we have discussed the driveway drainage solution and you can also learn about Inground pool

Cost in Texas and the whole process of inground pool installation.

Author  - Ultimate Construction

How to Install SOD in 5 Easy Steps?

How to Install SOD in 5 Easy Steps?

STEP 1: Know your soil 

It is important to understand how nutrients your soil is. You can buy a soil test kit, which is easily available in the market. To do a soil test, you need to take various samples of the soil from different places of the lawn and need to store the same in a labeled bag. It may take a couple of weeks to know the results. 

Also, be ready to answer the questions asked by the General contractors in San Antonio like how old is your lawn, quality of existing soil and its hardiness, whether and how much sunlight it receives, what will be the intensity of your usage, etc? 

STEP 2: Take the correct measurement  

It is essential to correctly measure the area which needs to be turfed. There are tools available that help you take the measurements correctly. It is advised that you order slightly more than the measured area so that you do not fall short of SOD while fitting the same in your lawn. 

Once you place an order, you must make sure that the same is delivered to you within 24 hours of cutting. Also, lay your SOD the day it arrives.  

STEP 3: Clean the area 

It is important to clean the area by removing the dirt and debris where the SOD installation will be done. It is also vital to remove the old grass before the turfing installation happens. You can apply any glyphosate-based product because they are systemic herbicide products that are curated to kill weeds. 

Apply this product on the dry leaf of the plant, so that it soaks up the chemical well. For maximum effectiveness, make sure the plant is not wet or drenched in rain. Just give it a couple of days before you apply the same the second time. Now use the sod cutter to eliminate the debris so that only a smooth and leveled surface is left. 

STEP 4: Preparing and Grading  

To ensure that the new grass penetrates smoothly and deeply, to result in a denser lawn, you need to prepare well before the actual turfing. When you are done with cleaning the site, grade the area well using a hand tool or tractor blade. It will not only eradicate the drainage problems if any but leveling the soil will also ensure a stronger foundation, removing the low-lying area, etc. You must also fertilize your area and rake the soil well.  

STEP 5: Lay SOD 

You can use things like a hose or landscape edger to cut around the corners while installing the SOD. Once done, roll the area using a lawn roller to smoothen the surface. You can also put some water for irrigation. So, the grass does not dry out.  

Wait for a week to allow SOD to settle and become smooth. Mow the SOD after a week of SOD installation.  

Here, we have described the complete step of Sod installation and if you want to know about drip irrigation and backyard design ideas then click on the link.

Author - Ultimate Construction  

How to Plan a Vegetable Garden

How to Plan a Vegetable Garden?

People across the world have understood the importance of organic farming, which is why they like to plan a vegetable garden on their own. Besides, it also ensures a healthy and safe environment. It is only in the presence of a good environment that people can grow healthily, and all kinds of economic and social development are possible. 

One of the main contributing factors for a healthy and safe environment is sustainable development. Sustainable development refers to the practice of using the available natural resources most judiciously to ensure that there is no wastage, and there are enough resources in store for the future generation as well. Landscape companies in San Antonio primarily help to plan and construct vegetable gardens for sustainable development. Having a vegetable garden is the most simple and easy way for individuals to contribute to making a better environment and healthy living.  

Following are some of the latest designs for a vegetable garden:

Smaller plots  

People living in smaller spaces can opt to divide the vegetable garden into smaller plots. The smaller sizes of the plots allow easy access to garden patches. It also gives a much neater appearance to the garden as well. Dividing the garden into smaller plots ensures that while working on the garden the individuals have enough space to move around without having to damage the soil in any way. Individuals can contact a vegetable garden design contractor to plan their garden efficiently.    

Crop Rotation  

Crop rotation refers to the practice of planning to harvest different varieties of crops or to ensure that the same variety of crops is not grown on the same patch of land, year after year. Crop rotation is one of the simplest and surest ways of ensuring that the land remains fertile and new nutrients are added to improve the quality of the soil. There should be a change in the crops being harvested once every three years. 

Aesthetic appeal of the Vegetable garden 

Most often, a garden fulfills the dual purpose of having aesthetic appeal and contributing to the environment, at the same time. A vegetable garden can also be used for the same reason. Planting ornamental flowers and other varieties of plants can add to the appeal of the vegetable garden. Adding creepers and vines to grow along the boundaries can also add to the beauty of the garden patch. Further, individuals can install benches, tea tables and chairs in the garden area as a place for relaxation and rejuvenation. Individuals can avail of services like San Antonio Lawn Mowing to maintain the beauty of the garden.     

Companion Planting 

Companion planting refers to the practice of growing vegetables with flowers. This way of gardening not only increases the beauty of the garden but also reduces problems of pests and diseases. It is preferable to plant combinations of vegetables and flowers that help to improve each other’s growth.

Making the soil beds higher 

Raised beds refer to the plant beds being at higher height above the ground. Raised beds are known to hold the loose soil, which is ideal for root crops. Raised beds allow better drainage, and it is appropriate for all kinds of shapes of plot and locations. 

Planting vegetables in containers 

Planting vegetables in containers under the soil are advisable as it allows the gardeners to plant and remove the plants with ease. It is a compact unit that ensures that the vegetable remains within particular confinement. This feature is particularly helpful in case of larger vegetables and in case the gardener wants to change the soil or position of the plants.  

Now you can plan your very own vegetable garden as per your requirements and tastes, with the help of the above guidelines.

Author - Ultimate Construction

San Antonio, Texas

In-ground Pool Cost in Texas

How much does it cost to build a swimming pool? 

One of the most important factors that affect the cost of building or installing a swimming pool is whether or not the individual wants to hire a professional service provider or a construction company or complete it as a DIY project. The cost of building and installing a swimming pool also depends on the type of swimming pool one chooses. There are mainly two types of swimming pools which are common these days: 

·         Above ground pools  

·         In-ground swimming pools 

The average cost of building a pool or in-ground pool installation an in-ground pool ranges between $25,700 - $29,600. 

Although, individuals may save up on the cost of service charges for building the swimming pool by building it on their own, they must be aware that the DIY pools take a longer time for construction and the individual may incur a higher cost of maintenance and repair in the long run. 

Building an in-ground swimming pool is more expensive in comparison to building a swimming pool above the ground. The in-ground pool kits include a variety of materials. The cost of construction is higher because an in-ground swimming pool in Texas requires more materials; the project requires a lot of expansion and elaborate preparation of the construction site as well.    

The lining of the pool is made with vinyl or fiberglass. This type of pool installation also requires patio surrounding and fencing.   

There are some additional costs that you should also keep in mind. They are: 

Accessories – Additional accessories like filters, pumps, cleaning tools, handrails, solar heating devices, thermometers, etc. are all accessories that are not compulsory but they are important to make your experience of using the pool more enjoyable. 

Solar heater – A solar heater is one of the most preferred accessories with regard to an in-ground swimming pool. It allows individuals to make use of the swimming pool throughout the year. 

Chemicals – Chlorine is needed to maintain the health and cleanliness of the pool. There is a certain Ph. testing strips available too that help to understand and regulate the amount of chlorine added to the water in the pool.  

Removing In-ground Pool 

Full removal of an in-ground pool is much more expensive than a partial inground pool removal. However, the process might be convenient if the location of the pool is within your property. You can then demolish and redesign the pool at your own convenience. It may not affect you even if the time taken for the removal is longer than you expected. 

A lot of raw materials go into making an in-ground pool. These materials include steel, wood, cement, vinyl, vermiculite, etc. In the process of removing the pool, the steel walls have to be removed.  

Method of in-ground pool removal  

The pool has to be removed and demolished completely. All the layers of concrete, fiberglass, granite, etc. the entire cavity of the pool has to be cleared. Then the area is compacted and filled. A licensed engineer should be consulted so that the demolition and the compacting plan is clear from every possible way. This is one of the ways to ensure that the pool plan is safe from all damages. Reliable service providers like Ultimate Construction who provides pool demolition inSan Antonio can help with such services

Author - Ultimate Construction

San Antonio, Texas

What is Drip Irrigation & How to install Drip Irrigation?

Follow my blog with Bloglovin

Drip Irrigation is of the utmost importance when we talk about agriculture and is one of the ancient technologies that is continued to be used and will be used forever. There has been a lot of advancement in recent years that have taken the irrigation system to a higher level. One such progress is the drip irrigation system. It is considered to be an efficient way of watering plants. It is believed that an ordinary sprinkler that is installed in a field can on an average cover about 80% of the area and provide water supply. In contrast, the drip irrigation system can provide about 90% efficiency in irrigating the plants. Also, these systems stand out as an inexpensive method of supplying water to the plants. Also, this system is easy to install and can be deployed with minimal errors and flaws. So if you are someone planning for a DIY adventure, here is how you can install the drip irrigation system in your backyard:

An overview

Whatever may be you're the purpose for the installation of a drip irrigation system, make sure you take an overview of the same before you plan to install it. 

Have a proper plan in mind

If you are trying out a micro-irrigation system for the first time, make sure that you start simple. Thus for installation of a drip irrigation system, you need to have a proper layout or sketch on how you are getting it installed. Take into account all the things and tools that will be used for the drip irrigation installation and plan your work accordingly. You can also seek assistance from Construction Contractors to help you a lending hand in getting the work done properly.

Make a connection with an outdoor faucet

You need to further insert the vacuum breaker in the pressure regulator, which will prevent the unwanted water from entering back into the supply lines. The filter should be further attached to the pressure regulator, and the whole assembly should be made complete.

Tubing

Now an unperforated tube should be connected with the hose bib. Further making use of barbed connectors, the roll of the tube should be combined with the emitters. If you are not much confident about the same, you can call for the Landscaping Companies in San Antonio to provide you assistance.

Freepik.com

Installation of ground stakes

When you have correctly installed the tunes and have got it fixed in the proper position, make use of plastic ground stakes to clasp it in a downwards direction. Make sure that the hooks that are present at the topmost part of the stakes properly fit the tube.

Lay down the tubing

After completing these steps, you can position the loops around various trees. You can also make use of a hole puncher to make half-inch hole for the tube from where the loop will initiate. Further, you can also insert a tee connector inside.

Close the tubes

Once you have attained success inadequately setting up the drip system, make sure that you flush off the dirt present over the tubes. After this, you need to close the end of the tubes so that it is held in its crimp position.

Bottom line

So this how you can get a mini drip irrigation system installed in your backyards. Make sure that you call for the Excavation Contractors, get your yard cleared so that you can kick start your DIY drip irrigation system soon.

Simple Backyard Design Ideas

Follow my blog with Bloglovin

Thinking about upgrading your landscape? Why not do it at low cost if there is one after all backyards bring in more beauty to your house and are like a feather on the cap. Ranging from de-cluttering, cleaning and fixing drainage solutions in San Antonio or wherever you are, there is a lot that you can do to your backyards to trigger your landscape designing inspiration. But the catch lies in how to improve your backyard in low budget. So if you are someone looking out for ways to repurpose your landscape, here are a few budget-friendly ways that you can try out: 

Get it de-cluttered 

The very first step to own a beautiful backyard is to clear it at first. Demolition contractors in San Antonio TX can help you get rid of any stumps and unwanted materials that may be occupying space in your backyard. So the primary step is to de-clutter and further move ahead in dressing up your yard to chant the glory of nature and serenity. 

Pave a path for areas with traffic 

There may be areas in your backyard, which may experience heavy traffic throughout the day. So consider getting it paved with a path that may highlight the walking space and makes it easy for easy passage. You can call in for the Landscaping Companies in San Antonio to get it designed in such a way that it speaks out your style and creativity. Also, it can be done on a budget without causing stress on your pockets. 

Lighting it up 

Not only is lighting a way to increase more visibility in your backyard, but it can also style it up in a way that will earn you compliments. Lighting up the path using floor bulbs and lighting up trees can escalate the ambiance of your landscape and let you unwind amidst nature even during the night. For this, you can get General Contractors in San Antonio TX to assist you in glamming up your backyard in a cheap and professional way. 

R for ‘revamping’ and not a replacement 

There are lot many things that you can try to beautify your landscape. And, for every beautification therapy, you do not need to invest kin replacement and buying new furniture and other utility. You can consider the reviving and revamping option instead. There may be lots of unused items and old furniture lying at your home; you can consider revamping it and using it for your backyard. This is an effective way to invest smartly to save yourself from spending oodles of cash flow for the beautification task. Also, it gives you a reason to try your creativity to carve things that can fit your backyard narrating your innovation. Seeking assistance from Construction Companies San Antonio TX can also let you dress your backyard in a cost-efficient way. 

Tire repurposing 

Backyards mean a lot of potted plants and trees for letting some freshness and air. Where the tree stands on the ground, your potted plants have a different story to narrate. They can get over anywhere, ranging from your walls to some hanging options, they can be accommodated anywhere and everywhere in your backyard. Using old tires for hanging your plants can also serve as a smart and cute option to showcase your plants. You can simply repurpose old and unused tires, paint them in your favorite colors and use it to hold your decorative plants. 

Bottom Line 

Backyard designing task may cost you a fortune, but if you are smart enough to revamp it cleverly, you can do it on a budget. These were a few ways in which you can add more limelight to your backyard in the budget. So get started and do let us know how if you have more such ideas to revamp your outer space. 

Author – Ultimate Construction

Website - http://www.constructionsatx.com