Drip Irrigation is of the utmost
importance when we talk about agriculture and is one of the ancient
technologies that is continued to be used and will be used forever. There has
been a lot of advancement in recent years that have taken the irrigation system
to a higher level. One such progress is the drip irrigation system. It is
considered to be an efficient way of watering plants. It is believed that an
ordinary sprinkler that is installed in a field can on an average cover about
80% of the area and provide water supply. In contrast, the drip irrigation
system can provide about 90% efficiency in irrigating the plants. Also, these
systems stand out as an inexpensive method of supplying water to the plants.
Also, this system is easy to install and can be deployed with minimal errors
and flaws. So if you are someone planning for a DIY adventure, here is how you
can install the drip irrigation system in your backyard:
An overview
Whatever may be you're the purpose for the installation of a drip irrigation system, make sure you take an
overview of the same before you plan to install it.
Have a proper plan in mind
If you are trying out a
micro-irrigation system for the first time, make sure that you start simple.
Thus for installation of a drip irrigation system, you need to have a proper layout or
sketch on how you are getting it installed. Take into account all the things
and tools that will be used for the drip irrigation installation and plan your work
accordingly. You can also seek assistance from Construction Contractors to
help you a lending hand in getting the work done properly.
Make a connection with an outdoor faucet
You need to further insert
the vacuum breaker in the pressure regulator, which will prevent the unwanted
water from entering back into the supply lines. The filter should be further
attached to the pressure regulator, and the whole assembly should be made
complete.
Tubing
Now an unperforated tube
should be connected with the hose bib. Further making use of barbed connectors,
the roll of the tube should be combined with the emitters. If you are not much
confident about the same, you can call for the Landscaping Companies in San Antonio to
provide you assistance.
 |
| Freepik.com |
Installation of ground stakes
When you have correctly
installed the tunes and have got it fixed in the proper position, make use of
plastic ground stakes to clasp it in a downwards direction. Make sure that the
hooks that are present at the topmost part of the stakes properly fit the tube.
Lay down the tubing
After completing these
steps, you can position the loops around various trees. You can also make use
of a hole puncher to make half-inch hole for the tube from where the loop will
initiate. Further, you can also insert a tee connector inside.
Close the tubes
Once you have attained
success inadequately setting up the drip system, make sure that you flush off
the dirt present over the tubes. After this, you need to close the end of the
tubes so that it is held in its crimp position.
Bottom line
So this how you can get a
mini drip irrigation system installed in your backyards. Make sure that you call
for the Excavation Contractors, get your yard cleared so that you can kick start your DIY drip
irrigation system soon.
