How to Install SOD in 5 Easy Steps?

How to Install SOD in 5 Easy Steps?

STEP 1: Know your soil 

It is important to understand how nutrients your soil is. You can buy a soil test kit, which is easily available in the market. To do a soil test, you need to take various samples of the soil from different places of the lawn and need to store the same in a labeled bag. It may take a couple of weeks to know the results. 

Also, be ready to answer the questions asked by the General contractors in San Antonio like how old is your lawn, quality of existing soil and its hardiness, whether and how much sunlight it receives, what will be the intensity of your usage, etc? 

STEP 2: Take the correct measurement  

It is essential to correctly measure the area which needs to be turfed. There are tools available that help you take the measurements correctly. It is advised that you order slightly more than the measured area so that you do not fall short of SOD while fitting the same in your lawn. 

Once you place an order, you must make sure that the same is delivered to you within 24 hours of cutting. Also, lay your SOD the day it arrives.  

STEP 3: Clean the area 

It is important to clean the area by removing the dirt and debris where the SOD installation will be done. It is also vital to remove the old grass before the turfing installation happens. You can apply any glyphosate-based product because they are systemic herbicide products that are curated to kill weeds. 

Apply this product on the dry leaf of the plant, so that it soaks up the chemical well. For maximum effectiveness, make sure the plant is not wet or drenched in rain. Just give it a couple of days before you apply the same the second time. Now use the sod cutter to eliminate the debris so that only a smooth and leveled surface is left. 

STEP 4: Preparing and Grading  

To ensure that the new grass penetrates smoothly and deeply, to result in a denser lawn, you need to prepare well before the actual turfing. When you are done with cleaning the site, grade the area well using a hand tool or tractor blade. It will not only eradicate the drainage problems if any but leveling the soil will also ensure a stronger foundation, removing the low-lying area, etc. You must also fertilize your area and rake the soil well.  

STEP 5: Lay SOD 

You can use things like a hose or landscape edger to cut around the corners while installing the SOD. Once done, roll the area using a lawn roller to smoothen the surface. You can also put some water for irrigation. So, the grass does not dry out.  

Wait for a week to allow SOD to settle and become smooth. Mow the SOD after a week of SOD installation.  

Here, we have described the complete step of Sod installation and if you want to know about drip irrigation and backyard design ideas then click on the link.

Author - Ultimate Construction  

How to Plan a Vegetable Garden

How to Plan a Vegetable Garden?

People across the world have understood the importance of organic farming, which is why they like to plan a vegetable garden on their own. Besides, it also ensures a healthy and safe environment. It is only in the presence of a good environment that people can grow healthily, and all kinds of economic and social development are possible. 

One of the main contributing factors for a healthy and safe environment is sustainable development. Sustainable development refers to the practice of using the available natural resources most judiciously to ensure that there is no wastage, and there are enough resources in store for the future generation as well. Landscape companies in San Antonio primarily help to plan and construct vegetable gardens for sustainable development. Having a vegetable garden is the most simple and easy way for individuals to contribute to making a better environment and healthy living.  

Following are some of the latest designs for a vegetable garden:

Smaller plots  

People living in smaller spaces can opt to divide the vegetable garden into smaller plots. The smaller sizes of the plots allow easy access to garden patches. It also gives a much neater appearance to the garden as well. Dividing the garden into smaller plots ensures that while working on the garden the individuals have enough space to move around without having to damage the soil in any way. Individuals can contact a vegetable garden design contractor to plan their garden efficiently.    

Crop Rotation  

Crop rotation refers to the practice of planning to harvest different varieties of crops or to ensure that the same variety of crops is not grown on the same patch of land, year after year. Crop rotation is one of the simplest and surest ways of ensuring that the land remains fertile and new nutrients are added to improve the quality of the soil. There should be a change in the crops being harvested once every three years. 

Aesthetic appeal of the Vegetable garden 

Most often, a garden fulfills the dual purpose of having aesthetic appeal and contributing to the environment, at the same time. A vegetable garden can also be used for the same reason. Planting ornamental flowers and other varieties of plants can add to the appeal of the vegetable garden. Adding creepers and vines to grow along the boundaries can also add to the beauty of the garden patch. Further, individuals can install benches, tea tables and chairs in the garden area as a place for relaxation and rejuvenation. Individuals can avail of services like San Antonio Lawn Mowing to maintain the beauty of the garden.     

Companion Planting 

Companion planting refers to the practice of growing vegetables with flowers. This way of gardening not only increases the beauty of the garden but also reduces problems of pests and diseases. It is preferable to plant combinations of vegetables and flowers that help to improve each other’s growth.

Making the soil beds higher 

Raised beds refer to the plant beds being at higher height above the ground. Raised beds are known to hold the loose soil, which is ideal for root crops. Raised beds allow better drainage, and it is appropriate for all kinds of shapes of plot and locations. 

Planting vegetables in containers 

Planting vegetables in containers under the soil are advisable as it allows the gardeners to plant and remove the plants with ease. It is a compact unit that ensures that the vegetable remains within particular confinement. This feature is particularly helpful in case of larger vegetables and in case the gardener wants to change the soil or position of the plants.  

Now you can plan your very own vegetable garden as per your requirements and tastes, with the help of the above guidelines.

Author - Ultimate Construction

San Antonio, Texas

In-ground Pool Cost in Texas

How much does it cost to build a swimming pool? 

One of the most important factors that affect the cost of building or installing a swimming pool is whether or not the individual wants to hire a professional service provider or a construction company or complete it as a DIY project. The cost of building and installing a swimming pool also depends on the type of swimming pool one chooses. There are mainly two types of swimming pools which are common these days: 

·         Above ground pools  

·         In-ground swimming pools 

The average cost of building a pool or in-ground pool installation an in-ground pool ranges between $25,700 - $29,600. 

Although, individuals may save up on the cost of service charges for building the swimming pool by building it on their own, they must be aware that the DIY pools take a longer time for construction and the individual may incur a higher cost of maintenance and repair in the long run. 

Building an in-ground swimming pool is more expensive in comparison to building a swimming pool above the ground. The in-ground pool kits include a variety of materials. The cost of construction is higher because an in-ground swimming pool in Texas requires more materials; the project requires a lot of expansion and elaborate preparation of the construction site as well.    

The lining of the pool is made with vinyl or fiberglass. This type of pool installation also requires patio surrounding and fencing.   

There are some additional costs that you should also keep in mind. They are: 

Accessories – Additional accessories like filters, pumps, cleaning tools, handrails, solar heating devices, thermometers, etc. are all accessories that are not compulsory but they are important to make your experience of using the pool more enjoyable. 

Solar heater – A solar heater is one of the most preferred accessories with regard to an in-ground swimming pool. It allows individuals to make use of the swimming pool throughout the year. 

Chemicals – Chlorine is needed to maintain the health and cleanliness of the pool. There is a certain Ph. testing strips available too that help to understand and regulate the amount of chlorine added to the water in the pool.  

Removing In-ground Pool 

Full removal of an in-ground pool is much more expensive than a partial inground pool removal. However, the process might be convenient if the location of the pool is within your property. You can then demolish and redesign the pool at your own convenience. It may not affect you even if the time taken for the removal is longer than you expected. 

A lot of raw materials go into making an in-ground pool. These materials include steel, wood, cement, vinyl, vermiculite, etc. In the process of removing the pool, the steel walls have to be removed.  

Method of in-ground pool removal  

The pool has to be removed and demolished completely. All the layers of concrete, fiberglass, granite, etc. the entire cavity of the pool has to be cleared. Then the area is compacted and filled. A licensed engineer should be consulted so that the demolition and the compacting plan is clear from every possible way. This is one of the ways to ensure that the pool plan is safe from all damages. Reliable service providers like Ultimate Construction who provides pool demolition inSan Antonio can help with such services

Author - Ultimate Construction

San Antonio, Texas

What is Drip Irrigation & How to install Drip Irrigation?

Follow my blog with Bloglovin

Drip Irrigation is of the utmost importance when we talk about agriculture and is one of the ancient technologies that is continued to be used and will be used forever. There has been a lot of advancement in recent years that have taken the irrigation system to a higher level. One such progress is the drip irrigation system. It is considered to be an efficient way of watering plants. It is believed that an ordinary sprinkler that is installed in a field can on an average cover about 80% of the area and provide water supply. In contrast, the drip irrigation system can provide about 90% efficiency in irrigating the plants. Also, these systems stand out as an inexpensive method of supplying water to the plants. Also, this system is easy to install and can be deployed with minimal errors and flaws. So if you are someone planning for a DIY adventure, here is how you can install the drip irrigation system in your backyard:

An overview

Whatever may be you're the purpose for the installation of a drip irrigation system, make sure you take an overview of the same before you plan to install it. 

Have a proper plan in mind

If you are trying out a micro-irrigation system for the first time, make sure that you start simple. Thus for installation of a drip irrigation system, you need to have a proper layout or sketch on how you are getting it installed. Take into account all the things and tools that will be used for the drip irrigation installation and plan your work accordingly. You can also seek assistance from Construction Contractors to help you a lending hand in getting the work done properly.

Make a connection with an outdoor faucet

You need to further insert the vacuum breaker in the pressure regulator, which will prevent the unwanted water from entering back into the supply lines. The filter should be further attached to the pressure regulator, and the whole assembly should be made complete.

Tubing

Now an unperforated tube should be connected with the hose bib. Further making use of barbed connectors, the roll of the tube should be combined with the emitters. If you are not much confident about the same, you can call for the Landscaping Companies in San Antonio to provide you assistance.

Freepik.com

Installation of ground stakes

When you have correctly installed the tunes and have got it fixed in the proper position, make use of plastic ground stakes to clasp it in a downwards direction. Make sure that the hooks that are present at the topmost part of the stakes properly fit the tube.

Lay down the tubing

After completing these steps, you can position the loops around various trees. You can also make use of a hole puncher to make half-inch hole for the tube from where the loop will initiate. Further, you can also insert a tee connector inside.

Close the tubes

Once you have attained success inadequately setting up the drip system, make sure that you flush off the dirt present over the tubes. After this, you need to close the end of the tubes so that it is held in its crimp position.

Bottom line

So this how you can get a mini drip irrigation system installed in your backyards. Make sure that you call for the Excavation Contractors, get your yard cleared so that you can kick start your DIY drip irrigation system soon.

Simple Backyard Design Ideas

Follow my blog with Bloglovin

Thinking about upgrading your landscape? Why not do it at low cost if there is one after all backyards bring in more beauty to your house and are like a feather on the cap. Ranging from de-cluttering, cleaning and fixing drainage solutions in San Antonio or wherever you are, there is a lot that you can do to your backyards to trigger your landscape designing inspiration. But the catch lies in how to improve your backyard in low budget. So if you are someone looking out for ways to repurpose your landscape, here are a few budget-friendly ways that you can try out: 

Get it de-cluttered 

The very first step to own a beautiful backyard is to clear it at first. Demolition contractors in San Antonio TX can help you get rid of any stumps and unwanted materials that may be occupying space in your backyard. So the primary step is to de-clutter and further move ahead in dressing up your yard to chant the glory of nature and serenity. 

Pave a path for areas with traffic 

There may be areas in your backyard, which may experience heavy traffic throughout the day. So consider getting it paved with a path that may highlight the walking space and makes it easy for easy passage. You can call in for the Landscaping Companies in San Antonio to get it designed in such a way that it speaks out your style and creativity. Also, it can be done on a budget without causing stress on your pockets. 

Lighting it up 

Not only is lighting a way to increase more visibility in your backyard, but it can also style it up in a way that will earn you compliments. Lighting up the path using floor bulbs and lighting up trees can escalate the ambiance of your landscape and let you unwind amidst nature even during the night. For this, you can get General Contractors in San Antonio TX to assist you in glamming up your backyard in a cheap and professional way. 

R for ‘revamping’ and not a replacement 

There are lot many things that you can try to beautify your landscape. And, for every beautification therapy, you do not need to invest kin replacement and buying new furniture and other utility. You can consider the reviving and revamping option instead. There may be lots of unused items and old furniture lying at your home; you can consider revamping it and using it for your backyard. This is an effective way to invest smartly to save yourself from spending oodles of cash flow for the beautification task. Also, it gives you a reason to try your creativity to carve things that can fit your backyard narrating your innovation. Seeking assistance from Construction Companies San Antonio TX can also let you dress your backyard in a cost-efficient way. 

Tire repurposing 

Backyards mean a lot of potted plants and trees for letting some freshness and air. Where the tree stands on the ground, your potted plants have a different story to narrate. They can get over anywhere, ranging from your walls to some hanging options, they can be accommodated anywhere and everywhere in your backyard. Using old tires for hanging your plants can also serve as a smart and cute option to showcase your plants. You can simply repurpose old and unused tires, paint them in your favorite colors and use it to hold your decorative plants. 

Bottom Line 

Backyard designing task may cost you a fortune, but if you are smart enough to revamp it cleverly, you can do it on a budget. These were a few ways in which you can add more limelight to your backyard in the budget. So get started and do let us know how if you have more such ideas to revamp your outer space. 

Author – Ultimate Construction

Website - http://www.constructionsatx.com

Modern Landscaping design ideas

Follow my blog with Bloglovin

Ranging from cleaning to soft-scaping and hard-scaping, there are ample things you can try out to beautify your landscape. A lot can be done with a bit of inventiveness and artistry towards your landscape to make it look amazingly beautiful. There are many construction companies San Antonio TX as well who can help you have a happy go lucky landscape design to get compliments from every visitor who visits your house. 

So if you are someone trying to update your backyards, here are a few ideal ways to make your landscape traditional and balanced explicating the modern touch of landscape designing. 

Clean it right away 

The very first thing that you need to do to have a perfect backyard is to clean it right away. A neat and clean landscape stands as welcoming and lays out a contemporary charm to your garden. Thus you must get rid of debris and unwanted materials before you start beautifying your gardens. You can also call in for professionals from drainage solutions if you face any drainage related issues in your backyard. This will ensure that no such drainage related problems that creep up at a later stage.

Lighting up 

Your backyards are not just meant for the day time where you can enjoy a bright sunny day in winters; they are also meant for the night. And in order to make your backyard welcoming for a night out seating arrangement, lighting is of utmost importance. Thus you can seek the assistance of a demolition contractor to get your landscape designed in such a way that it fits the night frame too. Not only lighting your backyard provides you a way to fight the darkness increasing safety but also looks aesthetically pleasing to have a chilling time out there. 

Adding planters 

Bringing in the planters to your backyards is way out to have a visual focal point in your gardens. It’s not necessary that you have to bring in the earthen pots from the market. You can use all the unwanted containers at home, decorate it using your creativity, and you are ready to go. You can also try them painting in colors to make it look more attractive and appealing. 

Fencing to charm 

Creating a fenced area all-around your backyards using modern fencing techniques can be a way to make your landscape look more charming and enthralling. It helps in creating an elegant appearance and is a hack that will never die a natural death. One can call in for the landscaping companies in San Antonio to get their backyards fenced right which will add a pinch of character to your lawn. The experts can make use of their creativity and expertise to bestow a modern and voguish appearance for your gardens. 

Arrange for seating 

Make proper arrangements for seating so that you can sit back and chill in your backyard. And, trust us; there is no need to run down in an expensive furniture store to bring a luxurious seat. You can also opt for low-cost seating and create a rustic look in your backyard. You can also make use of unwanted tires at home to convert into seating stools. One can also be carved furniture from unwanted wooden pallets to offer more seating functionality in your backyard. You can further theme them according to the central theme that you are following in your garden. Further, add a comfy touch by placing some cushions to have some relaxing seating options in the backyard. 

These were a few awesome ideas that you can implement in your backyards to make your landscape look modern and fantastic. You can also call in for the general contractors in San Antonio TX to make your landscape look gorgeous by the expertise that they possess in their field. 

Website -   

http://www.constructionsatx.com/

Phone    - 

2103794348

Address - 

San Antonio, Texas, US

In-ground Pool Demolition- Methods,Tools, Cost

Follow my blog with Bloglovin

Pools are love, but there are chances that you might think of closing down your poll and excavating them. This thought may arise because of an outdated pool that might be spoiling the show in your garden or any idea that may have crept up in your mind to use the area occupied by the pool for some better purposes. If you are someone looking forward to a pool demolition, then here are a few pool demolition methods that you can implement:-

1.      Partial pool removal 

Partial pool removal is a cost-effective method; thus, most people opt partial removal for swimming pool demolition. This method is also known as filling in pool removal. It is one of the most common demolition methods used. And, there are many excavation contractors in San Antonio TX whom you can contact to get your job done. In this process, three holes are drilled at the bottom of the pool so that water does not get collected inside it afterward. The holes facilitate the drainage system of water. After the drilling of holes, the sides are broken, measuring about 18 inches from the top part. The concrete that is scattered due to the breaking of sides is further collected inside the pool at the bottom. Once the concrete is gathered, the pool is again filled and compacted. Ensure that the compacting process is done right or you will end up creating a sinkhole in your garden. 

2.      Full pool removal 

Full pool removal, as the name suggests is eradicating your pool completely. It is done in such a way that you do not find any traces of a pool that had existed in your backyard. In this method, the pools are completely removed from your yards so that you can use that piece of land for any other purposes. The best part is that there will be no signs of the existence of a pool. This method is comparatively costlier than the partial pool removal but offers better usage and functionality of your land where once you enjoyed diving down the blues. For this, you need to seek assistance from experts of pool demolition San Antonio who can help you attain your goals of pool excavation. If you are planning to extend your house or build something at the place where your pool exists, then the full-pool removal method is the best alternative that you can consider. In this kind of pool demolition method, everything is removed. May it be fiberglass pools, vinyl liners, concrete or any material; everything is annihilated using equipment’s that are meant for demolition purposes. Once the extraction is done, it is further overhauled, and the place is cleared. Further backfilling and compacting process is done to give it a complete finish. In many cities, you may be required to get a permission and compaction plan approved by engineers before you start with the pool demolition work. 

3.      Do It yourself pool removal 

DIY pool removal is advised only if you are planning for above ground pool removal. If you own a pool that is constructed above the ground, the only labor required is on the area of draining the water inside the pool, breaking down the pool and disposing of it safely. For this, you may or may not seek the assistance of construction contractors. But this idea does not work well for in-ground pools. For the demolition of in-ground pools, one has to seek assistance from qualified removal contractors. 

So these were a few methods that you can try out for the demolition of pools at your home. Despite the method that you opt for demolition, you need to make sure that the demolition process proceeds smoothly. Ensure that the remains are properly disposed of so that you can make use of your land for your decided purposes. For this, hiring landscaping companies is the best option that you can think of to get the job done properly.

Website -   

http://www.constructionsatx.com/

Phone    - 

2103794348

Address - 

San Antonio, Texas, US